Hi-G Dryer can Make Waste Minimization

KOSUN Hi-G Dryer Shaker is with long shaker deck big capacity which is used for drilling waste management to treat the drilling cuttings from the primary solids control equipments like shale shaker, desande, desitler to dry the solids for transportation, and make the fluids easier for further treatment.The function of the HI-G Dryer is similar as Vertical Cutting Dryer.The Hi-G dryer not only ensured environmental compliance with DTI regurgitation but exceeded the operator’s own in-house target of 80 GMS/kg.

Benefits of Hi-G Dryer

1. Reduce the volume of Solid cuttings that will require further treatment & reduce their treatment cost $;

2. Reduces the amount of cutting boxes needed on location & their rental cost $;

3. Reduces the volume of wet waste by returning recovered mud from wet cuttings to the mud system. (But first it should pass over the centrifuge to remove ultra fine solids (less than 5 microns).

Hi-G Dryer can Make Waste Minimization

1.Wet cuttings from Shakers & Hydro-cyclones falls on conveyor;

2.Conveyor cuttings to Hi-G Dryer;

3.Dried cuttings collected in cuttings box  & recovered mud back to system.

After Hi-G dryer, high speed centrifuge will be followed for further treating. After treated by centrifuge, solids parts can be used for construction; liquid part can be further treatment by flocculent unit. Hi-G dryer is also can be used for oil based mud drilling cuttings treatment; vice versa, vertical cuttings dryer can also be used for water based mud drilling cuttings treatment. Based on this, KOSUN design it’s vertical centrifuge which can be used for both WBM and OBM drilling cuttings treatment.